We are among the topmost traders and suppliers of optimum quality
MS Plate. These products are known for their optimum performance, energy efficient design, minimum maintenance, longer functional life and sturdy construction. Offered by us at industry leading prices, these products are highly demanded in the market.
Features:
- Easy to operate
- Low maintenance
- Longer operational life
Specifications:
TDC | Ref Grade | Thickness range (mm) | State of the material |
HRO1 | IS 10748 Gr 1 | 2.00 - 4.99 | HR |
HRO2 | IS 1079DD | 1.60 -12.00 | HR |
HRO3 | SAPH 440 | 2.50 - 12.00 | HR |
HRO4 | BSK 46 | 3.5 - 8 | HR |
HRO5 | IS 2062 Gr-A | 2.00 - 4.99 | HR |
HRO6 | IRS M41-97 | 5.00 -12.00 | HR |
HRO8 | IS 2062 Gr-A | 5.00 - 12.00 | HR |
HRO9 | IS 10748 Gr 1 | 1.60 - 4.50 | HRSPO |
HR10 | IS 10748 Gr 2 | 1.60 - 4.50 | HRSPO |
HR11 | Tata PT(H) | 2.00 - 8.00 | HR |
HR12 | ASTM 622 (MOD) | 1.60 - 4.50 | HRSPO |
Thin Slab Caster & Rolling Mill:The Thin Slab Caster & Rolling Mill (TSCR) is the newest addition to the Flat Products Complex. The mill was commissioned on the 14th of February 12 and is equipped with all the latest technologies to cater to different requirements of the customers. It is an integrated shop where steel is made in the steel making shop (LD#3), then cast and rolled continuously. Unlike the HSM, there is no slab stage in this mill and thus it reduces the time lag.
LD#3 & TSCR has the following facilities:
- 2 Desulphurization Stations, 2 BOF Converters, 2 Online Purging (OLP) Stations & 2 Single Strand Casters
- Two tunnel furnaces and one emergency crop shear
- One 4 Hi 6 (+1) stand finishing mill with laminar cooling facility followed by 2 down-coilers
Unique Features to ensure best-in-class product:
- Vertical Caster equipped with Liquid Core Reduction and Dynamic Soft Reduction for better segregation control
- Calcium treatment for higher steel cleanliness
- Mill capable of rolling thinner (1 mm min) and wider (1680 mm max) sections
- Dynamic Continuous Variable Crown (CVC) and Work Roll Bending (WRB) technology for better control of profile, flatness and contour of rolled strip
- Dynamic Disturbance Compensators (DDC) for improved thickness tolerances
- Hydraulic Gap Control (HGC) for roll gap adjustment &Automatic Gauge Control (AGC)
- Edge masking on the run-out table for homogeneous mechanical properties